Technical Specification
| Weight |
78 kg |
| Height |
1790 mm |
| Width |
1100 mm |
| Depth |
605 mm |
Technical Description
Designed to fit through a standard doorway height of 1950mm high.
Universal whiteboard mounts are able to receive any make of interactive whiteboard:
up to 80 inches across the diagonal with 4:3 ratio aspect.
Maximum projector throw 1500mm.
Universal projector mount.
Casters are twin wheel, easy glide, heavy duty and individually lockable.
Operation:
Set-up the projector and whiteboard on the trolley as normal.
The interactive whiteboard is supported by the universal brackets and adjusted to the depth of the board required.
The projector is fitted to the universal ball jointed projector plate which provides a high quality, fully articulated attachment. This enables fine adjustment of the projected image before the use of keystoning.
When ready to be transported, electrically lower the board to the minimum height.
The boom plunger is then pulled out allowing the boom to be turned and locked at 90 degrees from set-up position. This allows the trolley to pass through the doorway.
The casters are high quality heavy duty, easy glide, twin wheeled, individually lockable with a rubberised finish for a smooth and reliable action.
Once the Hi-Lo 500 Interactive Whiteboard Trolley is repositioned in the new room, the boom is turned and locked back into the setup position and then raised electrically back into the original position.
This operation takes less than 30 seconds.
The projector is now back in the exact position as originally set-up and does not require any adjustment.
Construction is very high quality with precision engineering and reliable electrical motor.
The trolley is delivered fully assembled with minimum set-up time.
